Home » dong-co-giam-toc

Motor giảm tốc dolin 3HP-2.2kw

Chủ Nhật, 4 tháng 6, 2017

Motor giảm tốc Dolin 3HP

Hãng: Dolin

Xuất xứ: Đài loan

Công suất: 2.2kw

Tỷ số truyền: 250 – 1800

Kiểu: mặt bích, chân đế

Liên hệ: 091 502 31 28 – 098 151 65 48

Giới thiệu:

Motor giảm tốc dolin là một thiết bị đảm nhiệm vai trò chuyển đổi tốc độ quay của các động cơ xuống mức nhỏ hơn phù hợp hơn với yêu cầu của người dùng.

Motor giảm tốc dolin thường có 2 dạng:

Motor giảm tốc dolin mặt bích:

Mô tả:

Thông số kỹ thuật:

Specifications and Ratings/Chi tiết thông số kỹ thuật
	Category		High Ratio Helical Speed Reducing Motor
	Gear Ratio		1/250 ~ 1/1800
	Mounting		Vertical Flange Mount
	Output Shaft (Ø)		22mm ~ 60mm
	Gear Material		S45C (High-Frequency Wave), Scm21 (Carbonization)
			SCM4 (Nitrogen Hardening)
	Motor Specification and Rating
	Design Standard		IEC, CQC, JIS
	Pole		4P
	Output Power		0.1KW ~ 2.2KW (1/8 HP ~ 3HP)
	Rated Frequency		50Hz / 60Hz
	Time Duty		S1 (Continuous Duty)
	Stator Insulation		Class B
	Method of Starting		Full Voltage Direct On Line or Y-Δ Starting
Environmental Restriction
Place		Indoor. The product should be installed on flat and solid foundation
Voltage Regulation		10%
Frequency Regulation		5%
Ambient Temperature		-5°C~40°C
Attitude		Not exceed 1000 Meters
Relative Humidity		Less than 85% RH (Non-Condensation)
tructure
Shell Material		Aluminum Alloy (Adc356), Cast lron (Fc25)
Lubrication		Grease NO.0
Bearing		Grease Pre-Packed Double-Shield Rolling Bearing.
Terminal Box		Larger Size Made by Pressed Steel Which can be Set 90o Apart with
		Conduit Hole Cable Entrance at Left Side View from The Drive End.
Lead Terminal		Solderless Lug Teminal
Painting		Phenolic Rust Proof Plus Lacquer Surface Finished Painting in Blue Color
		(Munsell 7.5G 4/2.)
Bolt Thread		ISO Metric System

Motor giảm tốc dolin mặt bích

Mô tả:

Thông số kỹ thuật

Specifications and Ratings/Chi tiết thong số kỹ thuật
Category		High Ratio Helical Speed Reducing Motor
Gear Ratio		1/250 ~ 1/1800
Mounting		Horizontal Foot Mount
Output Shaft (Ø)		22mm ~ 60mm
Gear Material		S45C (High-Frequency Wave), Scm21 (Carbonization)
		SCM4 (Nitrogen Hardening)
Motor Specification and Rating
Design Standard		IEC, CQC, JIS
Pole		4P
Output Power		0.1KW ~ 2.2KW (1/8 HP ~ 3HP)
Rated Frequency		50Hz / 60Hz
Time Duty		S1 (Continuous Duty)
Stator Insulation		Class B
Method of Starting		Full Voltage Direct On Line or Y-Δ Starting
Environmental Restriction
Place	Indoor. The product should be installed on flat and solid foundation
Voltage Regulation	10%
Frequency Regulation	5%
Ambient Temperature	-5°C~40°C
Attitude	Not exceed 1000 Meters
Relative Humidity	Less than 85% RH (Non-Condensation)
ructure
Shell Material	Aluminum Alloy (Adc356), Cast lron (Fc25)
Lubrication	Grease NO.0
Bearing	Grease Pre-Packed Double-Shield Rolling Bearing.
Terminal Box	Larger Size Made by Pressed Steel Which can be Set 900 Apart with
	Conduit Hole Cable Entrance at Left Side View from The Drive End.
Lead Terminal	Solderless Lug Teminal
Painting	Phenolic Rust Proof Plus Lacquer Surface Finished Painting in Blue Color
	(Munsell 7.5G 4/2.)
Bolt Thread	ISO Metric System